Hardwood Plywood Sample

Hardwood Plywood — Sample (90 × 90 mm) Order a 90 mm × 90 mm Hardwood Plywood sample to evaluate face veneer quality, core construction, edge integrity, and finishing behaviour before purchasing full sheets or cut-to-size panels. Ideal for confirming stain/clear-coat appearance, machining quality, and whether the exposed edge suits your design. Ready to buy boards? See Hardwood Plywood — Full Board or Hardwood Plywood — Cut to Size from MDF Direct.  About Hardwood Plywood Hardwood plywood uses a hardwood face and back veneer (e.g., Oak, Walnut, Beech, Maple, etc.) over a stable multi-ply core (hardwood or softwood). Compared with softwood ply, it offers cleaner faces, better screw-holding, and finer edges, making it a favourite for furniture, cabinetry, millwork, and decorative interiors.  What This Sample Helps You Check Face quality & grain: colour, figure, patching, and sanded smoothness  Core consistency: voids, glue lines, and suitability for exposed edges  Machining behaviour: routing, drilling, and saw-cut cleanliness  Finish workflow: oil/varnish/lacquer or stain tone and evenness Typical Uses (full boards / cut to size) Furniture & cabinetry (doors, carcasses, drawer fronts/boxes)  Decorative wall/ceiling panels and architectural millwork  Retail & hospitality fit-outs, counters, and display units  Shelving and built-ins (supported spans)  Key Features Real hardwood face/back veneers on a dimensionally stable core  Smooth, sanded faces—ready for stain, oil, or clear lacquer  Predictable machining and strong screw-holding  Attractive edges that can be left exposed or edge-banded  Available in popular species & grades (stock varies)  Sample & Product Specs Sample size: 90 × 90 mm (nominal)  Faces: Hardwood veneer (species/grade vary by line)  Core: Multi-ply (hardwood/softwood mix depending on product)  Finish: Supplied sanded, unfinished  Use class: Interior, dry conditions  Master sheet sizes/thicknesses: see Full Board or Cut to Size Finishing & Handling Notes (full boards) De-dust, then test stain/clear coat on an offcut for final tone  Seal/finish all faces and edges; use matching veneer edging  if not leaving edges exposed  Use sharp TCG/ATB blades and proper support to minimise chipping and tear-out  Why Order from MDF Direct Move from sample to production with Full Boards or Cut to Size—we cut on calibrated equipment to ≈0.1 mm tolerance for clean, square parts. Delivery info: Delivery Information. Need help with species/grade selection? Contact MDF Direct.  Delivery & Availability Samples typically ship with your next parcel or by post. Full orders usually deliver in 4-5 working days (location dependent).  Safety Remember to follow safe handling guidelines for sheet materials when cutting or sanding. Use appropriate PPE and dust extraction.  Frequently Asked Questions 1. What species are available? Common options include Oak, Walnut, Beech, Maple and more (availability varies). See Hardwood Plywood — Full Board.  2. Is the veneer on both sides? Yes—there is a hardwood face and back; many lines use a balancing backer grade.  3. Can I paint hardwood plywood? You can, but it’s typically stained or clear-finished to showcase the grain. For paint, consider paint-grade panels.  4. Are the edges good enough to leave exposed? Often yes—sand and seal for a crisp, modern look, or apply matching edging. 5. Do you cut to size? Absolutely—order Hardwood Plywood — Cut to Size (put URL here) for made-to-measure panels.